RockitSeal - our latest 2nd generation seal

Our unique design enables RockitSeal to be fixed to existing tiles or below new tiling, it can even be fitted to misaligned tiles and deep grout joints and still provide the seal as desired. Strips are provided with pre-cut mitred ends to minimise installation time.

A concealed adhesive strip locates the seal whilst sealing adhesive bonds the seal in place.

RockitSeal is easy to fit, by the professional or DIY user, and is suitable for all flat topped bath/shower rims and work-tops. Fitting instructions are included in the pack, you can also view videos of the fitting process on our installation pages or via You Tube.

The pack includes the following items for a standard size bath or shower tray. You will need to buy a small tube of Clear solvent adhesive for uPVC to weld the corners and end joints. Please allow up to 5 minutes to dry unless using an activator:

2 x 1.85m lengths of RockitSeal (White)
1 x Corner & Ends pack (2 Internal Corners & 2 Telescopic End Caps)
1 x Sealing Adhesive
1 x Easy to follow fitting instructions

RockitSeal Dimensions:

Standard Seal length: 2 x 1850mm including pre-cut mitred ends
Seal height: 17mm self adjusting to 24mm - fully extended
Seal width/projection from wall: 18mm

Buy RockitSeal here

The UV stabilised uPVC extrusions form a neat, compact and telescopic assembly that appears as a discreet strip of trim on your bath or shower tray.

Our seals have been developed from our proven award winning technology that finally enables the permanent and mould free sealing of baths and shower trays to the wall.

RockitSeal’s unique design can allow up to 7mm of movement between the bath and the building structure, therefore preventing leaks during the life of your bathroom.

This revolutionary approach to the movement of sanitary ware in the bathroom enables a permanent, life long seal that removes the unhygienic breeding ground of unsightly mould-growth.

If you have a trade or export enquiry please contact us here.