RockitSeal Installation
Designed & Engineered to Seal for Life
Our Seals replace the bead of Silicone Sealant that so often goes black with mould and leaks causing unseen damage. The below step by step guide shows a bath being fitted with RockitSeal before the room is tiled. The process to fit the seal over existing tiles is the same.
This bath is ready to be sealed with RockitSeal in an Under Tile
configuration.
Measure the Bath
Cut the strips using a mitre block to achive the 90 degree corners.
Applie Sealing Adhesive to bath rim ready for foot strips.
RockitSeal foot strip being placed.
Foot strips positioned.
Corner Tab being fitted to align corner.
Corner being welded with the included solvent adhesive.
Sealing Adhesive being applied to wall.
Top Strip being fitted.
Completed Corner, welded for a water tight seal.
RockitSeal Installed and complete ready to be tiled.
